Troubleshooting - Ryobi 18V ONE+ Operator's Manual

PRIMARY
LED FUNCTION
LED
ERROR Flashes Red
ERROR Flashes Red
ERROR Solid Red
ERROR Flashes Red
ERROR Solid Red
This product has a Three-year Limited Warranty for personal, family,
or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com

TROUBLESHOOTING

SECONDARY
FUNCTION
LED
none none
Flashes
POWER
Green
Flashes
START
Green
Flashes
START
Green
START Solid Green
or call (toll free) 1-800-525-2579.
8 — English
ERROR
Internal temerature Stop using the unit and allow to cool
too high before using
18V Battery is not Charge the battery pack to a
charged or charge minimum of 50%
capacity is too low
The clamps are not Check clamps, reconnect if
connected neccessary
Vehicle battery Follow instructions in Using the
voltage is below 0.8V Jump Starter in Override Mode
or is not detected section.
The clamps are Check clamp connection. Connect
reverse connected the red clamp to the positive terminal
(+) and the black clamp to the
negative (-) terminal.
Vehicle battery Check vehicle voltage. For use only
voltage is too high with 12V batteries
(greater than 13V)
SOLUTION