Using Special Salt; Detergents With Salt Component; System; Rinse Aid - Bosch SMS63T08TC Instruction Manual

Table of Contents

Advertisement

en

Rinse aid

Using special salt

Always refill with special salt
immediately before
switching on the appliance. This
ensures that overrun special salt
solution is immediately washed out
and does not corrode the rinsing tank.
1. Open the screw-type
cap of the compartment 1R.
2. Fill the tank with water (only required
when switching on the appliance
for the first time).
3. Then add dishwasher special salt
(not table salt or tablets).
The water is displaced and runs out.
As soon as the low salt indicator H is
lit on the fascia or is requested in the
display window )2, salt should be
topped up.
* depending on model
Using detergents with salt
component
D e t e r g e n t s w i t h s a l t c o m p o n e n t
If combined detergents with a salt
component are used, salt can usually be
omitted up to a water hardness of
21° dH (37° fH, 26° Clarke, 3.7 mmol/
l). If the water hardness is over 21° dH,
special salt must be used.
12
Switching off salt refill
indicator/water softening

system

S w i t c h i n g o f f w a t e r s o f t e n i n g s y s t e m
If the use of combined detergents with a
salt component impairs the low salt
indicator H on the fascia or the text in
the display window )2 (Enough salt for
another x rinse cycles), the displays can
be switched off.
Proceed as described under "Setting
water softening system" and set
the value to :
The water softening system and salt
refill indicator are now switched off.
m
Caution
Never fill the salt dispenser with
detergent. You will destroy the water
softening system.
Rinse aid
R i n s e
As soon as the low rinse-aid indicator
P is lit on the fascia or is requested in
the display window )2, rinse aid
should be topped up.
The rinse aid is required for stain-free
utensils and clear glasses. Use only
rinse aid for domestic dishwashers.
Combined detergents with rinse-aid
component may be used up to a water
hardness of 21° dH (37° fH,
26° Clarke, 3.7 mmol/l) only. If
the water hardness is over 21° dH,
rinse aid must be used.
.
a i d

Advertisement

Table of Contents
loading

Table of Contents