Advertisement
note: Apply copper grease to the brake bleeding nipples before and after the brake bleeding procedure to reduce the possibility of seized or broken nipples
when the brakes are next bled (fig.5).
3.1.4. Connect the brake bleeder to a suitable compressed air supply.
3.1.5. Connect the rubber adaptor onto the brake nipple on the first wheel and open the nipple about one quarter of a turn (fig.3).
3.1.6. Activate the brake bleeder's valve. The vacuum created will draw the brake fluid from the vehicle's brake system.
3.1.7. Continue to bleed the system until there are no air bubbles visible in the clear tube (fig.4).
3.1.8. Retighten the brake nipple and close the bleeder's valve (fig.3).
3.1.9. Remove the rubber adaptor from the brake nipple.
3.1.10. Open the valve on the brake bleeder to remove any brake fluid from the clear pipe.
3.1.11. Repeat the process at each wheel in turn as necessary.
3.2.
Changing the brake fluid
3.2.1. Carry out the brake bleeding procedure as described above. As the fluid is being completely changed, regularly check the level in the replenishment bottle.
3.2.2. When new fluid can be seen in the clear tube tighten the brake nipple.
3.2.3. Repeat this procedure at each wheel in turn.
When brake bleeding and/or fluid changing is complete, test the action of the brake pedal to ensure that the brakes are working and are not
spongy, before using the vehicle on the road.
3.3.
Clutch bleeding procedure.
Refer to the relevant vehicle manufacturer's instructions for clutch bleeding procedure. If no specific instructions from the vehicle manufacturer exist, the
instructions basically follow the same procedure as the brake bleeding instructions in steps 3.1.1. through to 3.1.11.
fig.4
4. parts
iteM
part no.
DesCription
1.
VS0202.01
TRIGGER ASSEmBLY
2.
VS0202.02
HOSE ASSEmBLY
3.
VS0202.03
PLASTIC COnTAInER
4.
VS0202.04
GAuGE
5.
VS0202.05
TOP CAP
6.
VS021.06
LID FOR VS021.07
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMportant: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inforMation: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
sole uK Distributor, sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
iteM
part no.
DesCription
7.
VS021.07
COnTAInER (REPLEnISHmEnT)
8.
VS021.08
ADAPTOR 'A'
9.
VS021.09
ADAPTOR 'B'
10.
VS021.10
ADAPTOR 'C'
11.
VS021.11
ADAPTOR 'D'
01284 757500
01284 703534
fig.5
www.sealey.co.uk
Web
sales@sealey.co.uk
email
VS0202
Issue: 2 - 13/12/11
Advertisement
