Cisco Aironet 1850 Series Getting Started Manual page 4

http://www.cisco.com/c/en/us/products/collateral/wireless/access-points/product_data_sheet0900aecd
80537b6a.html
Model numbers ending in C are factory-shipped with a Cisco Mobility Express software image. For
more information, see the Cisco Mobility Express User Guide at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_Guid
e.html
Access Point Features
The features of the 1850 series access points are:
• Supported mode(s) of operation:
Centralized
–
• Supports Cisco Mobility Express solution. The 1850 series access point can operate as a master
AP (having an integrated wireless controller functionality) in a Cisco Mobility Express network.
For more information, see the Cisco Mobility Express User Guide at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_
Guide.html
• Radio features supported are:
2.4 GHz and 5 GHz concurrent radios
–
2 GHz radio with 3TX x 4RX and three spatial streams SU-MIMO
–
5 GHz radio with 4TX x 4RX 802.11ac Wave 2 capable with four spatial stream SU-MIMO
–
and 3 spatial streams MU-MIMO
802.11ac based Transmit Beamforming
–
Quality of Service (QoS)
–
Radio Resource Management (RRM)
–
Rogue Detection
–
BandSelect
–
• The AP supports the following hardware external interfaces:
RS-232 Console Interface through RJ-45
–
Local Power DC Jack
–
Mode button. For information on how to use the Mode button, see
–
section on page
USB 2.0 port (no software support at this time)
–
4
23.
"Using the Mode Button"