Power Saving Function; Mute Function; Safety Lock; Child Lock - Sharp YC-QC254AE-B User Manual

POWER SAVING FUNCTION

This feature allows power to be saved while the oven is not being used. To activate this feature while in the standby
mode, press and hold STOP/ECO button for 3 seconds, the display will turn off ; the oven will enter power saving
mode.
To cancel the power saving mode, press any button or open and close the oven door.

MUTE FUNCTION

It is possible to mute any tones from the microwave using the mute function. To set mute function press CHILD LOCK
button once the display will show "oFF" for 5 seconds. While in the mute mode, there will be no sound when buttons
are pressed.
To turn off the mute function, press the CHILD LOCK button once; the display will shows "on" for 5 seconds to
indicate the sound has been turned back on.
If the mute function is set and the oven is disconnected from the mains supply, it will be canceled when the mains is
reconnected.

SAFETY LOCK

This is an automatic function to prevent unsupervised operation of the oven by children. While in the standby mode,
if there is no operation within one minute, the oven will automatically enter Safety lock mode and "Loc" will appear
in the display. In the lock state, all buttons are disabled. Press any button, lock indication appears on the display for 5
seconds to remind user to cancel the Safety lock.
To turn the safety lock off simply open and close the door to the microwave and the keypad will become active again
and the lock indicator light will turn off .

CHILD LOCK

To set the CHILD LOCK, press and hold the CHILD LOCK button for 3 seconds, a long beep will be heard and the
display will indicate "Loc". The oven is now in the CHILD LOCK mode. While in this mode, the display will show the
clock, if any key is pressed or the door is opened, "Loc" will be seen for 5 seconds.
To cancel the CHILD LOCK, press and hold the CHILD LOCK button for 3 seconds until a long beep sound is heard.

AUTOMATIC PROTECTION MECHANISM

OVERHEATING PROTECTION – When the oven senses a high temperature the display will indicate "E01" and stop
operating. This can be canceled by pressing the STOP/ECO button.
LOW TEMPERATURE PROTECTION – When the oven enters the low temperature protection mode, the display will
indicate "E02" and stop operating. This can be canceled by pressing the STOP/ECO button.
SENSOR MALFUNCTION PROTECTION – When the oven senses an issue with one of the sensors "E03" will be
displayed and the oven will stop operating. In addition, the oven will emit a warning tone. This can be canceled by
pressing the STOP/ECO button.
EN – 19 EN – 19
EN