Therefore, SUNRISE assumes no responsibility for loss, damage or expense resulting from improper installation, handling or misuse. SUNRISE module can be installed by many kinds of methods including, but are not limit Prohibited.
Max. system voltage V 1500 (IEC) 1500 (IEC) 1500 (IEC) installation. SUNRISE assumes no liability on the basis of these Max. fuse rating [A] instructions. SUNRISE is only liable in the context of contractual agreements or in the context of accepted Permissible –40 °C to +85 °C...
Installation Site • Guarantees long-term stability. Fig. 3: Installation options for crystalline SUNRISE modules. All dimensions are given in mm. • Avoid the usage of different metals to prevent contact Please note the following guidelines that apply to the Also observe the allowed static loads and clamping range as specified on the following page.
Page 5
PLANNING 2.3 Mounting options PLANNING 2.3 Mounting options Specifications DISTANCE BETWEEN MODULES Ä Maintain an interval of at least 10 mm between two modules along the short side TEST-LOAD ACC. IEC 61215 MODULE TYPE MOUNTING OPTION CLAMPING AREA [MM] PUSH/PULL [PA] Ä...
Page 6
INSTALLATION 3.1 Safety and transport INSTALLATION 3.1 Safety and transport Ä Ensure that all personnel are aware of DANGER ! Risk of fatal injury due to electric and adhere to accident-prevention and shock! safety regulations. Ä Do not install damaged modules. Ä...
INSTALLATION INSTALLATION 3.3 Module installation INSTALLATION 3.2 Preparation of installation 3.2 Preparation of installation Option 1: Ä Maintain an interval of at least 10 mm ! Risk of fatal injury due to electric ! Risk of injury due to falling DANGER WARNING Ä...
ELECTRICAL CONNECTION 4.2 Electrical installation safety ELECTRICAL CONNECTION 4.1 Safety DANGER! ! Risk of fatal injury due to electric ! Risk of fatal injury due to electric DANGER DANGER ! Risk of fatal injury due to electric DANGER Risk of fatal injury due to electric shock! shock! shock! shock!
Page 9
ELECTRICAL CONNECTION 4.4 After installation ELECTRICAL CONNECTION 4.3 Connection of modules Use solar cables for the connection at NOTE ! Module damage may occur! Ensure that all necessary safety and NOTE ! Module damage may occur! the junction box outlet. functional tests have been carried out Ensure that the cabling is not under Ä...
(waterfall, reservoir, etc.), these situations may cause PID reducing the performance of the PV system. To reduce SUNRISE solar modules are known for a long operating the risk of PID, we strongly recommend installers to have life and minimal maintenance effort and expense. Dirt such protections: and grime are usually washed away by rain.
Need help?
Do you have a question about the Aquaman SR-54MNHLPro and is the answer not in the manual?
Questions and answers