TomTom One User Manual page 16

Tap this button to change your route so that it passes a particular location,
perhaps to pick someone up on the way.
You choose the location you want to pass in the same way as you choose a
Travel via...
destination. So you can select from all the same options: for example,
Address, Favorite, Point of Interest and Point on map.
Your ONE will calculate a new route to your destination that passes the
location you chose.
Using this button, you can only travel via one location. If you want to pass
more than one, use an Itinerary. For more information, see Itinerary
planning on page 26.
Tap this button to return to the original route without any deviations for
roadblocks or to travel via particular locations.
Recalculate
original
Tap this button to avoid a part of the route. Use this button if you see that
your route includes a road or junction you don't like, or which is well-known
for traffic problems.
Avoid part of
You then choose the road you want to avoid from a list of the roads on your
route
route.
Tap this button to recalculate your route so that it avoids traffic problems as
much as possible. Your ONE will check if there are any traffic problems on
your route and work out the best route to avoid the problems.
Minimize
For more information about using TomTom Traffic, see TomTom Traffic on
traffic delays
page 40.
16