Specifications - Sony STR-D915 Operating Instructions Manual

Specifications
(For U.S.A. and Canadian models)
Audio Power Specifications
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 8-ohm load, both channels
driven, from 20 - 20,000 Hz, rated 110
watts (STR-D915) or 100 watts (STR-
D715) per channel minimum RMS
power, with no more than 0.3 % total
harmonic distortion from 250
milliwatts to rated output.
(U.S. A. model only)
(oh dal-tam) ola barechelolar
Amplifier section
Continuous RMS power output (8 ohms, at 20 Hz - 20 kHz less than
0.3 % total harmonic distortion) (FRONT)
STR-D915: 118 W + 118 W
STR-D715: 110 W + 110 W
Surround mode
ee ee
come [ew
ean | WT Ww
* (only in theDOLBY SUR and THEATER modes)
28
Dynamic power output
STR-D915: 160 W + 160 W (8 ohms)
225 W + 225 W (4 ohms)
STR-D715: 155 W + 155 W (8 ohms)
220 W + 220 W (4 ohms)
Harmonic distortion at rated output
Less than 0.3 %
Frequency response PHONO: RIAA equalization curve
+0.5 dB
CD, DAT/MD, TAPE MONITOR,
VIDEO 1 ,2, 3°: 10 Hz - 50 kHz ., dB
*STR-DYI5 only
Inputs
82 dB/82 dB
—_ 82 dB/82 dB
* STR-D915 only
Outputs
REC OUT VIDEO 1,2 Voltage 250 mV
(AUDIO) OUT Impedance 10 kilohms
HEADPHONES Accepts low and high impedance
headphones
MUTING -20 dB
LOW BOOST +10 dB at 70 Hz
TONE +8 dB at 100 Hz and 10 kHz