Advertisement
Symptom
Power-On light is on, but the
Status light is off
~
I
Action
1.
Is either the
~
1 ,
~
2 ,or
~
3
displayed?
YES: Go to "Operator Messages" on page 17.
NO: Go to step 2.
2.
Set the I/O switch to 0 (Off).
3.
Make sure the video cable is firmly connected
to the logic element.
4.
Set the I/O switch to I (On).
Video Cable
Communication Cable
5.
Set the Test/Normal switch to Test.
~
Continued on the next page.
~
________________
~~~
____________________________________________________
~23
Advertisement
