Parts & Features; Operation Instructions - Black & Decker BCRD32 Series Instruction Manual

SET UP & USE
PARTS & FEATURES
Freezer
Compartment
Temperature
Control /
Interior Light
Full Width Wire &
Glass Shelves
Crisper
Adjustable
Leveling Legs

OPERATION INSTRUCTIONS

TEMPERATURE CONTROL
NOTE: · If the refrigerator/freezer has been placed in a horizontal or tilted position for any period
of time wait 24 hours before plugging the unit in.
• The settings of the temperature control are "0, 1, 2, 3, 4, 5, 6, 7." Adjust the
temperature control to the setting that best suits your needs. The setting of "4"
should be appropriate for home or office use.
• Turning the temperature to "0" position will shut off the cooling cycle, but does
not turn off the electrical power to the unit.
NOTE: · Wait 3-5 minutes before restarting if you unplug the refrigerator. The unit may fail to
operate properly if restarted too quickly.
· If the ambient temperature is too high, the refrigerator may not reach the desired target
temperature.
· Large amounts of foods will lower the cooling efficiency of the appliance.
· Do not place the foods on the air outlet and leave spaces for airflow.
· If you choose to change the thermostat setting, adjust thermostat control one increment
at a time. Allow several hours for temperature to stabilize between adjustments.
Page 8
Hinge Cover
Full Width
Door Shelf
Inner Door Shelf
Can Dispenser
Storage
2-Liter
Tall Bottle
Storage Area