Samsung CLX-330 Series User Manual page 113

Understanding display messages
11
Misc. messages
Message
Adjusting Color The machine is adjusting the
color registration.
Registration
Calibrating The machine is calibrating
the image density.
image density...
Door Open The cover is not securely
latched.
Close it
Scan Unit Open The scan unit is not securely
latched or paper has
or Exit JAM
jammed in the scanner area.
Door of scanner is The cover of scanner is not
open. securely latched.
Meaning Suggested solutions
Wait a few minutes.
Wait a few minutes.
Close the cover until it
locks into place.
• Clear the jam (see
"Clearing original
document jams" on
page 98).
• Close the cover until it
locks into place.
Close the cover until it
locks into place.
Message
Error [error number] The indicated toner
cartridge is installed
Install [color] toner
improperly, or the connector
is polluted.
Error [error number] The machine unit cannot be
controlled.
Turn off then on
Error [error number]
Call for service
Scanner Locked The scanner is locked.
Install TR. The transfer belt is not
installed.
belt unit.
Not compatible The transfer belt of the
machine is not for your
transfer belt
machine.
Not installed The waste toner container is
not installed.
Waste tank
Meaning Suggested solutions
Reinstall the Samsung-
genuine toner cartridge
two or three times to
confirm it is seated
properly. Or clean the
connector. If the problem
persists, contact the
service representatives.
Reboot the power and try
the printing job again. If
the problem persists,
please call for service.
Reboot the power. If the
problem persists, please
call for service.
Install a Samsung-
genuine transfer belt.
Install the a Samsung-
genuine part designed
for your machine.
Install a Samsung-
genuine waste toner
container.
4. Troubleshooting
113