Rosewill RMS-MT3710 User Manual

Flosewill RMS-MT3710
Universal Tilting Wall Mount User Manual
Tools Required
+ Phillips Head Screwdriver
e Ratchet or Driver with 1/2" (13 mm) Socket
* Portable or Electric Drill
© 1/4* (6 mm) Drill Bit and Stud Finder for Drywall Installation
* 7/16" (11 mm) Masonry Bit for Concrete Installation
Warnings
1. Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, contact a professional
installer for assistance.
2. The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; otherwise the structure must be reinforced.
3. Safety gear and proper tools must be used. A minimum of two people are required for
this installation. Failure to use safety gear and/or attempting this installation alone
can result in property damage, serious injury, or death.
4. Follow alll instructions and recommendations regarding adequate ventilation and
suitable locations for mounting your display. Consult the owner's manual for your display
for more information.
Hardware Kit
(Ref) Item (Qty)
(Jammu (A) Max12 Bott (x4) (SB) M430 Bolt (x4) (C) M4 Lock Washer (x4)
Rewer) (D) M5x12 Bolt (x4) (GEE © MO Bot (x4) (F) M5 Lock Washer (x4)
wail Maxi2 Bot oa) (NOTON +) Meas Bott 4) SE (WMG Lock Washer (x4)
emma ereeereneercenerne renee
een () MBx16 Bott (x4) pl (4) Max40 Bot xa) SPE (L) MB Lock Washer (x4)
—_ (M) Small Spacer (x4) ia (N) Large Spacer (x4) (LL (O) Me Washer (x4)
O = (P) Concrete (Q) M8x63 R (R) Lag Bott
BS FF® anchor (6) S S F Lag Bolt (x6) ue) Washer (x6)