Advertisement
x 2
IF USING THE OPTIONAL NO-DRILL INFLATION VALVE BRACKET, CHOOSE OPTION 1. IF DRILLING,
CHOOSE OPTION 2. INFLATION VALVE MUST BE ACCESSIBLE BY AN AIR CHUCK.
1
Secure the Air Inflation
Valve Bracket to a pro-
tected, secure location.
PROCEED TO STEP 3.
LARGE
NYLON TIES
Inflation Valve
install locations.
2639 Installation Instructions
2
Select a protected location
to install the Inflation Valve,
such as the bumper or the
body of the vehicle.
Drill a 5/16" hole for
Inflation Valve install
location.
5/16"
EXAMPLE
BUMPER
To ECU
3032
INFLATION
VALVE
3025
1/4" PUSH-TO-
CONNECT TEE
To air springs
OPTIONAL INFLATION VALVE INSTALL
x 2
3
Install Inflation Valve
Assembly as shown.
AIR LINE TUBE
3032
INFLATION VALVE
INFLATION
Vehicle body,
VALVE
bumper or
Inflation Valve
Bracket.
RUN AIR LINE TO OPTIONAL INFLATION VALVE
1
To air compressor
3025
1/4" PUSH-TO-
CONNECT TEE
2
3025
1/4" PUSH-TO-
CONNECT TEE
3
4
5/16" - 16 FLAT WASHER
INFLATION
VALVE NUT
VALVE CAP
Run Air Tubing from the
location of the installed
Inflation Valve in Step 6
to the Air Tubing that
connects the two installed
1/4" Push-to-Connect Tees.
Cut the piece of Air Tubing
that connects the two
installed 1/4" Push-to-
Connect Tees.
Install the Air Tubing into the
1/4" Push-to-Connect Tee,
as shown.
Install the Air Tubing
into the Inflation Valve,
as shown.
6
7
10
Advertisement
