Table of Contents
Advertisement
2
1
1
WARNING: AVOID INJURY. Read
and understand Maintenance and
Service Safety Rules in Safety
section before attempting service or
adjustments.
DISCHARGE CHUTE DEFLECTOR
Deflector must stay in selected position while
throwing snow.
To adjust, loosen then retighten hardware to
desired deflector drag force (Figure 9).
1
1
1. Auger and Shaft
2. Discharge Chute
3. Sprocket/Pinion
Assembly
4. Axle Shaft
5. Shift Lever Arm
SERVICE AND ADJUSTMENTS
6
7
3
6. Pinion Chain
7. Hex Shaft
8. Shift Link
Figure 8
Adjusting
Hardware
DISCHARGE CHUTE
If chute does not stay in position while
operating, tighten nut on carriage bolt at pivot
point to increase tension on spring (Figure 10).
Smooth and easy rotation of properly
lubricated chute with crank is obtained by
adjusting pinion and chute gear teeth so they
mesh together.
GB - 19
8
Grease
Discharge
Chute Deflector
Figure 9
5
4
Oil
OS0641
OS0741
OS0113
Advertisement
Table of Contents
