Powering On - Redx RX-0050B User Manual

RX-0050B
Lithium iron phosphate battery system User Manual
3.4 Powering on and off (Start up & Shutdown)
Start up:
Before powering on the system, ensure that all post-installation checks are completed.
Before powering on the battery, Check whether the fault light is on. If it is not on, it is normal.
Before powering on the device, ensure that all loads are off.
Operating Steps
Step 1 Close the breakers on each battery.
Step 2 Close any external breakers if installed.
Step 3 Press the start button 3-6s on the high voltage module in each battery case. Release
the button when the indicator turns on----End
Powering off (Shutdown) :
Before powering off the system, ensure that all post-installation checks are completed.
Before powering off the battery, Check whether the fault light is on. If it is not on, it is normal.
Before powering off the device, ensure that all loads are off.
Operating Steps
Step 1 Open the breakers on each battery.
Step 2 Open any external breakers if installed.
Step 3 Press the start button 8s on the high voltage module in each battery case. Release
the button when the indicator turns off----End
Document Version: V1.3
Issued Date: 2023-08-24
21