Advertisement
Technical Specifications
LED: 4*red LEDs
Battery: 800mAh/3.7V rechargeable Lithium-ion battery
Dimensions (light unit): 38mm (L)*25mm (W)*57mm (H)
Weight (light unit): 51g
Package includes:
tail light *1,
rubber strap mount *1,
USB-C cable *1
Performance Parameters
| Brightness level | Brightness (lumens) | Run time (hrs) | Impact resistance | Water resistance |
| High | 40 | 4.5 | 1 meter | IPX6 |
| Mid | 20 | 7.5 | ||
| Low | 5 | 26 | ||
| Warning flashing | 200 | 7.5 | ||
| Rapid flashing | 100 | 8 | ||
| Slow flashing | 100 | 6.5 |
Note: The above data are tested in Lab standard and may vary by environment and user conditions.
Quick Guide
Power button: Long press the button 0.5s to turn on/off power; Single click to cycle through brightness levels.
Mode Memory circuit to remember the last used brightness level when on again.
Auto on-off and brake detection mode:
When the light is off, press the power button and hold till the light blinks quickly, then release the button to activate/deactivate this mode.
In this mode, the light will switch to 100 lumens output for 2s when detecting braking. The light will switch off automatically after staying still for 2 minutes and turn on with a vibration.
Low battery indicator
Blue indicator: <20% power;
Blinking blue indicator: <5% power; Please charge your light soon.
Auto power save
When in low power, the light will switch to low brightness level to save power.
USB-C charging
Standard charging time: 5.5h;
(approximate values and may vary by user conditions). Built-in over-charge protection.
Charging indicator
Blinking blue light during charging and constant blue light when charging completed.
Mounting Your Light
Make sure the light is mounted securely before riding.
- Fix the rubber strap mount to the seatpost as the right picture shows;
- Clip the light to the mount;
- Adjust the angle for max visibility.
Safety
Attention
Make sure the light is mounted securely each time before riding.
Release the light from the bike while in the outdoors in case of theft.
To maintain the best performance and extending the life of the Lithium-ion battery, it's recommended:
- Check the battery and charge the battery up before your first riding.
- Avoid completely discharging, allow partial discharges and avoid over charging (usually).
- Keep and storage your light at room temperature.
- Charge your light to 50% full every 3 months for long term storage.
Alert!
Don't disassemble or modify the light, otherwise it may cause danger and void your warranty.
Lithium-ion battery inside, don't put the light in a fire, otherwise it may cause explosion!
Please charge the light with qualified USB power adapter, using defective USB power adapter may cause power leakage or fire disaster, etc. Ravemen is not responsible for any of such consequences.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download RAVEMEN TR200 - 200 Lumens Wireless Rear LED Light Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the TR200 that isn't answered in the manual? Leave your question here.