NYMAS SB-080 Installation And Operating Instructions

Installation and Operating Instructions
Premium wall mounted shower seat with legs & pad
Premium wall mounted shower seat with legs & pad
Available colours: DB, EB, GY
Congratulations on the purchase of your wall mounted folding shower seat. This shower seat
has been designed for general domestic use to give users extra support in the shower. It provides
support and assists with the independent sitting of persons while washing, regardless of physical
ability.

Warnings:

• Always read the installation, operating and maintenance
instructions.
• Due to manufacturing tolerances we do not recommend pre-
drilling wall fixing holes before physically receiving this product.
• A thorough check must be carried out on receiving delivery of
this product and report any defects immediately.
• Opening the packaging without due care and attention could
result in damage to the product or injury to yourself or others.
• This product must be stored in a dry place, the right way up and
not stacked under other equipment on site.
• The wall/floor on which the seat is installed must be flat and
capable of taking the load.
• Non-corrosive fixings should be used to fix this product to the
wall.
• Installation must be carried out by a qualified tradesman using
suitable fixings for the wall substrate.
• Never alter the fixing holes as this could affect the strength and
integrity of the shower seat.
• Improper installation / use can cause accidents and injuries.
Make sure the legs are in a vertical position.
• IEE electrical earthing regulations may apply to this product.
Consult a qualified electrician.
• The Max Rated load is 250kg.
• The Max Rated load for the arm rests is 100kg per pair.
• The arm rests are designed for user comfort and should not be
used to take users weight.
• After installation, a functional test must be carried out prior to
use and recheck the legs are in a vertical position.
PI_SB-080_Rev 00
• These instructions should be retained by the user of the product for
its whole life time.
• Ensure that the adjustable legs are extended to the correct length
for fitted height of the seat prior to use.
• Never adjust the leg heights after the seat has been fixed to the wall
as this may make the seat unsafe to use.
• Do not unscrew the rubber foot any more than 30mm, the thread
showing should be 30mm or less
• Do not use the shower seat for any purpose other than that for
which it was designed.
• Do not use the seat if damaged / not securely fixed to the wall as
this may cause injury.
• Do not place matches / cigarettes on or near this product.
• Keep poly bag packaging away from children.
• Beware the seat should not be subjected to impact.
• Beware due to trap hazards, ensure no part of the body is under, in
the way of or in-between the seat mechanisms before folding the
seat and / or armrests.
• Ensure the folding seat / leg frame label instruction is adhered to.
To prevent damage to the mechanism.
• Ensure the armrests have some friction in the folding mechanism to
hold themselves up when folding to the vertical position.
• This product should not be used for extended periods of time.
• Surfaces of this seat may become slippery when wet and soapy.
• Never use any part for support when folded up in the vertical
position.
• To maintain the integrity and functionality of this product, regular
cleaning and inspection is necessary.
• If in doubt, carry out your own risk assessment for each installation.
SB-080