NYMAS NymaPRO 130203 Installation And Operating Instructions

Installation and Operating Instructions
Shower Seat Range
Wall Mounted Shower Seat with Legs
Wall Mounted Shower Seat with Back, Arms and Legs
Wall Mounted Padded Shower Seat with Legs
Wall Mounted Padded Shower Seat with Back, Arms and Legs
Available colours: 130202, 130203 - WHITE (WH)
130204, 130205 - GREY (GY)
Congratulations on the purchase of your wall mounted folding shower seat. This shower seat has been
designed for users to sit on in the washroom area. It assists with the comfort and independence of the
user while washing.

Warnings:

• This seat has been tested with a static load of
190kg on the seat.
• Do not use the shower seat for any purpose other
than that for which it was designed.
• Ensure no part of the body is under the seat before
folding it down.
• The wall on which the shower seat is installed
must be flat and capable of taking the load.
• Improper installation/use can cause accidents
and injuries.
• Installation must be carried out by a qualified
tradesman using suitable fixings for the wall
substrate.
• After installation a functional test must be carried
out prior to use.
QI0006 01
• On receiving delivery of this product, a thorough
check must be carried out and any defects
immediately reported. The product must be stored in
a dry place and not stacked under other equipment.
• These instructions should be retained by the user of
the product for its whole life.
• The arm rests are designed for user comfort and
should not be used to take the users weight.
• Non corrosive fixings should be used to fit this
product.
• To maintain the integrity and functionality of this
product, regular cleaning and inspection is necessary.
130202
130203
130204
130205