Related Manuals for Pro-dig X16K5
Summary of Contents for Pro-dig X16K5
- Page 1 AUGER & ANCHOR DRIVE (SINGLE SPEED) X16K5 X16K5 SINGLE SPEED Instruction Manual Manual number: PROX16K5 Operating Instructions Owners Manual Maintenance Release Date: September 3, 2011 Safety Precautions Parts Lists 785.856.2661 WWW.PRO-DIG-USA.COM...
-
Page 2: Table Of Contents
X16K5 SAFETY STATEMENTS PREFACE THIS STATEMENT IS USED WHERE SERIOUS INJURY OR DEATH WILL RESULT IF This manual is used to familiarize you with safety, assembly, operation, adjustment, troubleshooting, and THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY. DANGER maintenance. Read and follow the recommendations in this manual to ensure safe and efficient operation. -
Page 3: General Precautions
• Keep all parts of your body away from the drilling bit when operating the unit. • Keep a first aid kit near by when operating equipment. • DO NOT operate the PRO-DIG ® Auger Drive when the auger bit is more than 12” (305mm) above ground. -
Page 4: Specifications/Component And Control Locations
X16K5 OPERATING PROCEDURES Motor Mount SAE “CC” 4 Bolt Motor 400.0cc OPERATIONS TO AVOID Before operating always ensure that the PRO-DIG Auger Bidirectional Speed ™ Min. Hydraulic Flow 10 GPM Drive and auger or anchor are connected correctly to the 1. -
Page 5: General Maintenance/Checking And Changing The Gear Oil
• Quick release couplers not engaged. Check connections. • If equipment has been altered in any way from it original design, PRO-DIG ™ does not accept any liability for injury or warranty. - Page 6 X16K5 WWW.PRO-DIG-USA.COM 785.856.2661...
- Page 7 X16K5 GUARANTEE AND WARRANTY Goods manufactured, rebuilt, supplied or installed by the Company are warranted against defects in material or work- NOTES: manship by the Company or its supplier for twelve months but the Company may transfer to the customer the benefit of any subsisting guarantee which the Company may hold in respect thereof.
- Page 8 PROUD MEMBER OF: 1604 ROSEPORT RD ELWOOD, KS 66024 785.856.2661 WWW.PRO-DIG-USA.COM...