Starting/Stopping/Adjusting The Air Speed; Using The Nozzles; Using The Appliance As A Blower - Toro UltraPlus 51621 Operator's Manual

Hide thumbs Also See for UltraPlus 51621:
Table of Contents

Advertisement

1. Extension cord
Starting/Stopping/Adjusting
the Air Speed
Figure 8
2. Cord lock

Using the Nozzles

Install the power and concentrator nozzles into the blower tube
to reach into narrow spaces or to remove matted debris from
hard surfaces.
g224197
1. Blower tube
2. Power Nozzle
Using the Oscillator Nozzle
Accessory
Install the oscillator nozzle onto the blower tube to save time
clearing hardscapes. It automatically sweeps the back-and-forth,
creating a wider blowing path with less side-to-side wrist
movement.
Note:
Remove the oscillator nozzle before using the cord wrap
to store the appliance.
Using the Appliance as a
Blower
The appliance used as a blower is intended for residential use
only. Use it outdoors to move debris as needed.
g025396
WARNING
Using the appliance as a blower can throw debris,
possibly causing serious personal injury to you or
bystanders.
Do not blow hard objects such as nails, bolts, or
rocks.
Do not operate the blower near bystanders or pets.
Use extra care when cleaning debris from stairs or
other tight areas.
Wear safety goggles or other suitable eye
protection, long pants, and shoes.
5
g025397
3. Concentrator nozzle
4. Cord wrap
g026691

Advertisement

Table of Contents
loading

Table of Contents