Assembling The Blower; Operation; Starting, Stopping, And Adjusting The Air Speed Of The Blower - Toro 51701 Operator's Manual

125–3279
125–3293
Setup
Register your product at www.Toro.com to ensure that Toro can
notify you in the case of a safety or warranty product recall.
Charge the battery before first use. See (page ).

Assembling the Blower

1. Slide the blower tube onto the sweeper. You may need to
press down on the tabs for the blower tube to install properly
(Figure 1).
g019526
1. Tabs
2. Align the tongue of the battery pack with the cavity in the
handle housing, grasp the handle, and push the battery pack
into the handle until the latch locks into place (Figure 2).
1
1. Battery latch

Operation

Important: This blower is intended for outdoor, residential
use only. Do not use it indoors or for commercial or industrial
purposes. This appliance is for household use only.
Starting, Stopping, and
Adjusting the Air Speed of the
Blower
Adjust the air speed by moving the switch to the desired position
(Figure 3).
4
1
Figure 1
g019551
Figure 2