Assembly - Klarstein 10038404 Manual

• If the wine cooler is not going to be used for an extended period of time, it is
recommended that you power it off, clean it carefully and open the door for
ventilation.
• The table below shows the recommended temperature for storing and drinking
different types of wine:

ASSEMBLY

Installing the door handle and reversing the door of the wine cooler
1. Install handle to the door frame of the appliance.
The handle is delivered in a separated
package along with the required
screws.
(1) Reveal two small holes on the
inner side of the door frame by lightly
pulling the door seal out.
(2) Aim the handle to the holes and
insert the screws from inside.
(3) Screw them up with a screw-
driver.
(4) Replace the door seal to cover
the screws.
Red wine 15-18 °C
White wine 9-14 °C
Rosé wine 10-1 1 °C
Champagne & 5-8 °C
sparkling wine
EN
31