Inverter Power Supply - Panasonic NN-GD566M Service Manual

5.9. Inverter power supply

1.Always leave the grounding plate in place.
2.Always securely tighten the ground screw
through the bottom of the chassis (base).
3.Securely connect 3 lead wire connectors.
4.Make sure the heat sink has enough space (gap)
from the oven. Take special care not to touch any
lead wire to the aluminum heat sink because it is
hot.
1. Remove cabinet outer panel.
2. Remove the the H.V.lead wire from magnetron terminals.
CAUTIONS
19