Remove the camera and microphone board
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 33
"Remove the battery pack" on page 34
"Remove the Wi-Fi card" on page 38
"Remove the upper case(with keyboard)" on page 50
"Remove the LCD panel" on page 52
"Remove the hinges and the LCD cable" on page 56
Step 1.
Disconnect the cable between the camera board and microphone board.
Figure 54. Disconnect the cable between the camera board and microphone board
Step 2.
Remove the camera board.
CAUTION:
The camera board is fragile and easily-bent. Remove it with care.
Figure 55. Remove the camera board
58
Hardware Maintenance Manual