Table of Contents
Advertisement
2. Push the hook to open the filter.
3. Gather lint with hand from both internal
parts of the filter.
Throw the lint in the dustbin.
4. If necessary, clean the filter with a
vacuum cleaner. Close the filter.
5. If necessary, remove lint from the filter
socket and gasket. You can use a
vacuum cleaner. Place the filter back
inside the filter socket.
10.2 Emptying the water container
Empty the condensed water container after
each drying cycle.
If the condensed water container is full, the
programme stops automatically. The
symbol comes on the display and you must
empty the water container.
To empty the water container:
1. Pull the water container out keeping it in a
horizontal position.
2. Pull the plastic connection out and drain
the water into a basin or equivalent
receptacle.
3. Push the plastic connection back in and
place the water container back into
position.
4. To continue the programme press the
Start/Pause button.
Tank
ENGLISH
21
Advertisement
Table of Contents
