How To Enter Into The Hotel Model - Haier LE55K5000TFNa Service Manual

Service Manual
Model No.:

8.3 How to enter into the hotel model

1. You can press "source-1-0-0-1" to go into the hotel model. Presse the key "exit"
to shut the hotel model.
Content:
1.Hotel Mode: Hotel mode switch
2.Max Volume : Max volume limit. After setting, the max Volume of any channel is the volume you
set in this setting.
3.Default Volume: set allowed default volume
4.Default Source: to set the signal channel when the unit is turned on
(Off/DTV/ATV/Scart/YPbPr/Pc/HDMI/AV/USB)
5.Default Channel : under DTV and ATV, you can lock the unit to one specific channel after
6.Source Lock: set a source locked or not. When "Source Lock" is on , you can choose
if default source is DTV or ATV , next you can set channel number of default program
7.Panel key Lock: set keypad locked or not
8.OSD Lock: Set OSD menu display or not when press menu key
9.Standby LED Power: Set Indicating lamp display or not
10.USB Cloning: clone OSD settings & channel data to USB disk
11.Reset All Lock: restore the default setting of hotel mode
12.Hotel Logo Welcome Message: update the welcome message. Make sure that the file—hotel.txt
Note: three Blank lines are used to display the welcome message after implementing "Welcome Message Update
you set the "Start Channel" into one channel
in the root path of USB disk before updating.
- 53 -
"Default Source",