Advertisement
4. operation
4.1.
connect the usB cable into the charge socket on back of the lamp. Plug into power supply and turn on, the charging led on the
lamp will light red to show charging has commenced.
4.2.
When the battery has fully charged the led will turn Green.
4.3.
direct the lens away from your eyes before switching on.
4.4.
toggle the lamp between 1W end and 2W coB using the push switch.
4.5.
suspend the lamp by the hanging hook. When the light is hanging from the hook it can be rotated through 360° for more precise
positioning.
4.6.
Alternatively use the magnet on the base to attach the lamp to any ferrous surface.
parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste electrical and electronic equipment (Weee). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
battery removal
remove the 4 screws on the back of the lamp. remove the back casing and disconnect the wiring from the
circuit board. remove the battery. dispose of according to local government
under the Waste Batteries and Accumulators regulations 2009, Jack sealey ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered wih Valpak's
registered compliance scheme. Jack sealey ltd's Batteries Producer registration number (BPrn) is BPrn00705.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
Original Language Version
guidelines.
01284 757500
01284 703534
led3601series.V2 | issue 1 04/04/17
www.sealey.co.uk
sales@sealey.co.uk
Advertisement
