Table of Contents
Advertisement
FILL THE TOP OF THE IMAGE TO THE SCREEN
If the top of the image is wider than the screen, then use the
wrench to rotate the left- and right-front feet of the Laser TV
clockwise.
If the top of the image is narrower than the screen, then use
the wrench to rotate the left- and right-back feet of the Laser
TV clockwise, until the left and right borders of the image are
parallel with the screen borders.
Next, move the projector further from the screen to fill the image
to screen width.
If the back feet are already at their maximum height, rotate the
the left- and right-front feet counterclockwise.
Rotate the back feet clockwise
Rotate the front feet
counterclockwise
12
Advertisement
Table of Contents
