Change The Power Settings - Lenovo 21FC0038CA User Manual

Table of Contents

Advertisement

charged in about one hour when the computer is turned off. The actual charging time depends on the battery
size, the physical environment, and whether you are using the computer.
Battery charging is also affected by its temperature. The recommended temperature range for charging the
battery is between 10°C (50°F) and 35°C (95°F).
Note: Some models may not ship with ac adapters or power cords. Use only the certified adapters and
power cords provided by Lenovo that comply with the requirements of relevant national standards to charge
the product. It is recommended to use the Lenovo qualified adapters. You can refer to
www.lenovo.com/us/en/compliance/eu-doc
Notes: To maximize the life of the battery:
• Use the battery until the charge is depleted and recharge the battery completely before using it. Once the
battery is fully charged, it must discharge to 94% or lower before it will be allowed to recharge again.
• Keep the battery from full charge when it is not in heavy use. For more information, refer to the Battery
settings tab in the power section of the Vantage app.
• The battery may optimize its full charge capacity based on your usage. After prolonged periods of limited
use, full battery capacity may not be available until you discharge to as low as 20% and recharge
completely. For more information, refer to the power section of the Vantage app.

Change the power settings

®
For ENERGY STAR
compliant computers, the following power plan takes effect by default when your
computer is on ac power and has been idle for a specified duration:
• For models with Windows 10
– Turn off the display: After 10 minutes
– Put the computer to sleep: After 10 minutes
For models with Windows 11
– Turn off the display: After 5 minutes
– Put the computer to sleep: After 5 minutes
To reset the power plan:
1. Go to Control Panel and view by Large icons or Small icons.
2. Click Power Options.
3. Choose or customize a power plan of your preference.
To reset the power button function:
1. Go to Control Panel and view by Large icons or Small icons.
2. Click Power Options, and then click Choose what the power buttons do on the left pane.
3. Change the settings as you prefer.
24
ThinkPad P16v Gen 1 User Guide
.
https://

Advertisement

Table of Contents
loading

Table of Contents