Table of Contents
Advertisement
Quick Links
Moku:Go
Quick Start Guide
Moku:Go Layout
Powering On & Off
Connect the magnetic power supply to the magnetic power adaptor on your Moku:Go. The device will turn on
automatically when it is connected to power.
To turn your Moku:Go off, unplug the power supply.
X
Status LED
Moku:Go's status LED indicates the
current device mode. The LED is off
when the power is disconnected. Once
the power is connected, it is in one of
the four states, shown on the right.
Installing The Moku: App On Your Computer
Download the Moku: Application for your
Windows or Mac computer from
Liquid Instruments Website > Products >
Software > Desktop
Apps.
Windows: Run the installer and follow the
prompts to install the application.
Mac: Drag the icon to your applications folder
to install.
©2022 Liquid Instruments
Color
On
Blinking
Visit
liquidinstruments.com
or email
•
Booting
Recovery mode
Firmware update
support@liquidinstruments.com
•
Ready
for assistance.
Advertisement
Table of Contents
Related Manuals for Liquid Instruments Moku-Go-M2
Summary of Contents for Liquid Instruments Moku-Go-M2
- Page 1 Installing The Moku: App On Your Computer Download the Moku: Application for your Windows or Mac computer from Liquid Instruments Website > Products > Software > Desktop Apps. Windows: Run the installer and follow the prompts to install the application.
- Page 2 The status LED will turn off once the unit reinitialization is completed. You can now power cycle your Moku:Go by unplugging and replugging in the magnetic power supply. It will restart in Wireless Access Point mode with Ethernet enabled where applicable. ©2022 Liquid Instruments Visit liquidinstruments.com or email support@liquidinstruments.com...
Need help?
Do you have a question about the Moku-Go-M2 and is the answer not in the manual?
Questions and answers