Liquid Instruments Moku:Go Quick Start Manual

Moku:Go
Quick Start Guide
Moku:Go Layout
Powering On & Off
Connect the magnetic power supply to the magnetic power adaptor on your Moku:Go. The device will turn on
automatically when it is connected to power.
To turn your Moku:Go off, unplug the power supply.
X
Status LED
Moku:Go's status LED indicates the
current device mode. The LED is off
when the power is disconnected. Once
the power is connected, it is in one of
the four states, shown on the right.
Installing The Moku:Go App On Your Computer
Download the Moku:Go Application
for your Windows or Mac computer
from liquidinstruments.com/
resources/software-utilities/windows-
mac-app/.
Windows: Run the installer and follow
the prompts to install the application.
Mac: Drag the icon to your applications
folder to install.
©2021 Liquid Instruments
Color
On
Blinking
Visit liquidinstruments.com or email
•
Booting
Recovery mode Firmware update
support@liquidinstruments.com
•
Ready
for assistance.