Table of Contents
Advertisement
Available languages
Available languages
Replacing the outer foil
We recommend replacing the outer foil [H] every year and
the inner blade every two years. Remove the outer foil of the
shaver head [H] only when replacing it.
1. While pushing the outer foil gently with the fingers, use a
fingernail to release the plastic panel (b) on the blade
from the hooks (a) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed in
until it is hooked in the frame.
Replacing the file
The file lifetime is approximately 1 year (assuming a single use
every 2 weeks with approximately 10 minutes per use). We
recommend replacing the file about once a year.
1. Press down with your finger and release the file.
2. Align the
shaped part with the
down.
Removing the built‑in rechargeable battery
Remove the built-in battery when disposing of the epilator.
Do not dismantle or replace the battery so that you can use the
epilator again.
Perform steps 1 to 7 to disassemble the epilator using a
screwdriver.
• Unplug the AC adaptor from the epilator before disassembling
it.
• Press the OFF/ON switch to turn on the power and then keep
mark side and press
the power on until the battery is completely discharged.
• Please take care not to short-circuit the battery.
For environmental protection and recycling of materials
This epilator contains a Li-ion battery.
Please make sure that the battery is disposed of at an officially
assigned location, if there is one in your country.
11
Advertisement
Table of Contents
