Table of Contents
Advertisement
NAME AND FUNCTION OF EACH COMPONENT
CONTROLLER INSTRUCTIONS
POWER ON/OFF
Press this button while connected to power to show the menu display, the LCD Screen is lit, use the
UP/DOWN/LEFT/RIGHT buttons to navigate the screen, press OK to select.
Press this button again to turn off the product.
MENU
Display the Auto Program, Manual Program, Airbag, Heat, Roller and Settings function.
(Check the Display Menu for detailed information)
SHOULDER POSITION ADJUSTMENT BUTTON(MOVES MECHANISM UP AND DOWN)
Press and hold Position UP/DOWN ADJUST button to adjust the rollers to the desired position while
in Manual-Point massage mode.
While body scanning is working, use these two buttons to slightly adjust mechanism up/down
the shoulder.
AUTO PROGRAM BUTTON
Press to start the pre-set auto massage programs. You can choose Extension, Re-fresh, Recovery, Relax,
Neck&Shoulder, Waist&Buttocks massage programs according to your liking.
(Check the Display Menu for detailed information).
MANUAL PROGRAM BUTTON
Display the manual mode menu, press UP or DOWN button to navigate among: Kneading, Knocking,
Tapping, Shiatsu and Sync massage techniques.
(Check the Display Menu for detailed information)
NAVIGATION BUTTON
Use the UP/DOWN/LEFT/RIGHT arrow buttons to navigate the screen,
OK
press OK to select.
HEAT ON
Press to turn on heat, the heat icon will be lit on display screen;
Press again to turn off heat, the heat icon will go dark on display screen;
www.tmgindustrial.com
PRESS THIS BUTTON TO POWER ON/OFF THE CONTROLLER.
8/22
Toll Free:1-877-761-2819
Advertisement
Table of Contents
