Commissioning; Before Sitting In The Chair; After Use - TMG -LMC68 Product Manual

PRELIMINARY CHECKS

COMMISSIONING

Use the controller to recline the backrest to its lowest position, raise and extend the footrest to its top position,
make sure there is enough clearance before commissioning.
Return the backrest and footrest back to its default position after commissioning and turn off the power switch.
To choose the massage program, please check the Instructions of Control Panel and Instructions of Touchscreen
Controller for reference.

BEFORE SITTING IN THE CHAIR

Ensure the footrest is well assembled before sitting on the massage chair.
Ensure the massage chair is returned to its original position before sitting on it.
If there is any part not in default position, please turn off the massage chair to allow it to restore.
CAUTION
Do not take seat while the legrest is lifted.
Do not put excessive load on the legrest to avoid damage.

AFTER USE

Always unplug the massage chair from the electrical outlet immediately after use.
Put the Touchscreen Controller onto the holder.
Turn off the power switch and unplug the massage chair from the electrical outlet while not in use to avoid
children power on the massage chair accidentally.
When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled and
that the unit be placed in an environment free of dust and moisture.
www.tmgindustrial.com 19/22 Toll Free:1-877-761-2819