Asus Cerberus - Gaming Headset Manual

Package contents

• 1 x ASUS Cerberus analog gaming headset
• 1 x Extended Y-cable (splitter cable)
• 1 x Detachable ultra flexible microphone
• 1 x Quick Start Guide

Getting to know your headset

1. Cerberus headset
2. Detachable ultra flexible unidirectional microphone boom
   Storable and adjustable unidirectional microphone for two-way communication.
3. In-line omnidirectional microphone
   Omnidirectional in-line microphone for two-way communication.
4. Microphone mute switch
   Allows you to put the microphone on mute mode.
5. In-line volume control
   Allows you to increase/decrease the in-line volume.
6. Extended Y-cable (splitter cable)
   Allows you to connect to the microphone and headphone ports of your computer.

Specification summary

• Frequency response: 20Hz~20kHz
• Speaker driver: 60mm neodymium magnet speaker drivers
• Impedance: 32 ohms
• Ear cups: 100mm large ear cups with ultra breathable material
• Connectors: 3.5mm 4-pole analog connector (smart devices)
• Extension: 3.5mm 3-pole analog headphone & microphone Y-cable connector
• Microphone boom: -40dB sensitivity unidirectional microphone boom
• In-line microphone: -45dB sensitivity omnidirectional microphone

Using your headset

NOTE: There are L and R markings on the ear cups.

Connecting to smart devices

• Connect your headset's analog connector into your smart device such as mobile phone or tablet PC.
• Use the in-line controllers to increase/decrease the volume or mute the microphone.

Connecting to PC or MAC

1. Connect your headset's analog connector into the bundled Y-cable.
2. Connect the Y-cable's headphone connector to your computer's headphone port.
   Connect the Y-cable's microphone connector to your computer's microphone port.
3. You can connect the bundled microphone boom to your headset.
   NOTE: The in-line microphone is disabled when the microphone boom is connected.
4. Use the in-line controllers to increase/decrease the volume or mute the microphone.

Safety and Maintenance

Safety Guidelines

• If your device does not work properly and troubleshooting does not work, unplug the device and contact the ASUS Service Center for assistance. DO NOT attempt to service or fix the device yourself.
• DO NOT disassemble the device as doing so will void its warranty.
• Protect the cables from being stepped on or compressed, particularly at the point where it exits from the device.
• Keep the device away from liquid, humidity or moisture. Operate the device only whthin the specific temperature range of 0^oC (32 ^oF) to 40^oC (104 ^oF). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.

Maintenance

The Cerberus gaming headset requires minimum maintenance to keep it in optimum condition. We recommend that you clean it once a month using a soft cloth or cotton swab with a bit of warm water. DO NOT use soap or harsh cleaning agents.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Asus Cerberus - Gaming Headset Manual