Procusini mini Manual page 21

5.5 Removing the printed object
Let the object cool down until it is completely solid.
Remove the silicone mat from the printing table and
bend the mat slightly to remove the object.
Clean the silicone mat for the next production.
NOTE
!
Make sure that the silicone mat is always free of dirt and dust.
Otherwise the silicone mat may slip on the printing table.
5.6 Stop print
STOP
Press "Stop" to cancel the current print. Select this menu item
to return to the object selection.
5.7 Remove cartridge
If you want to remove the cartridge from the printer without cleaning it,
select "Insert" in the start screen and insert a new cartridge.
Alternatively, select "Remove" under "Menu".
5.8 Switch off
Press the on/off switch on the back of the unit.
A separate "shutdown" is not necessary.
EN
21