Internal
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
Connectors
1 x CPU fan header
1 x water cooling CPU fan header
2 x system fan headers
1 x 3 Amp fan/water cooling pump header
1 x digital LED strip header
1 x digital LED strip power select jumper
2 x RGB (RGBW) LED strip extension cable headers
2 x M.2 Socket 3 connectors
8 x SATA 6Gb/s connectors
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
2 x USB 3.1 Gen 1 headers
2 x USB 2.0/1.1 headers
1 x Thunderbolt
1 x Trusted Platform Module (TPM) header
1 x temperature sensor header
1 x Clear CMOS jumper
Back Panel
1 x PS/2 keyboard/mouse port
Connectors
2 x USB 3.1 Gen 2 Type-A ports (red)
6 x USB 3.1 Gen 1 ports
1 x RJ-45 port
6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker
Out, Line In, Line Out, Mic In)
®
I/O Controller
iTE
I/O Controller Chip
Hardware
Voltage detection
Temperature detection
Monitor
Fan speed detection
Water cooling flow rate detection
Overheating warning
Fan fail warning
Fan speed control
* Whether the fan (pump) speed control function is supported will depend on the fan
2 x 128 Mbit flash
BIOS
Use of licensed AMI UEFI BIOS
Support for DualBIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
™
add-in card connector
(pump) you install.
™
- 7 -