Related Manuals for v.LOGiC V5-CIC-F-PNP
Summary of Contents for v.LOGiC V5-CIC-F-PNP
- Page 1 Intelligent Solution Interface V5-CIC-F-PNP Compatible with the F-series BMW with navigation system or radio and 7”, 8.8” or 10.2” monitor with 4pin HSD LVDS connector Version 12.08.2021 V5-CIC-F-PNP...
- Page 2 • Picture-in-picture mode combining after-market rear-view and front camera picture(s) with factory parking sensor graphics • Compatible with all factory video accessories (e.g. rear-view camera, Top-View, nightvison, DVD-changer, TV-tuner) • USB update-port for software-updates by consumer Version 12.08.2021 V5-CIC-F-PNP...
-
Page 3: Table Of Contents
8-button iDrive 4.1.1.2. 2-button iDrive in Mini 4.1.2. OSD – Additional setting options 4.2. Video-in-motion function 4.3. Selecting the interface as current video-source 4.4. Controlling of the connected SMART-LINK module 5. Specifications 6. Connections (interface-box) 7. Technical support Version 12.08.2021 V5-CIC-F-PNP... - Page 4 To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded. Version 12.08.2021 V5-CIC-F-PNP...
-
Page 5: Prior To Installation
Check compatibility of vehicle and accessories Requirements Navigation F-series with navigation system or radio with 7“, 8.8” or 10“ monitor (F-series) with 4pin HSD LVDS connector Note ”PDC – picture in picture” function is only for 8.8” and 10“ monitor available Version 12.08.2021 V5-CIC-F-PNP... -
Page 6: Setting The Dip Switches Of The Interface-Box V5C-M636
CIC-F (F-series), 10“ monitor – version 1 CIC-F (F-series), 10“ monitor – version 2 After each change of the DIP switch settings you have to execute a power reset of the interface-box! 1.4. LED‘s of the interface-box V5C-M636 Valid%input source CAN%ok Power Version 12.08.2021 V5-CIC-F-PNP... -
Page 7: Connection Schema
2. Connection schema Version 12.08.2021 V5-CIC-F-PNP... -
Page 8: Installation
Quadlock connector of harness TV-BM01 at the same position. Connect female Quadlock connector of vehicle harness to the male Quadlock connector of harness TV-BM01. Connect female Quadlock connector of harness TV-BM01 to the male Quadlock connector of the navigation computer Version 12.08.2021 V5-CIC-F-PNP... -
Page 9: Lvds Connection
4pin HSD LVDS connector (LVDS-OUT) on the rear of the interface-box V5C-M636. Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-DD075-O to the pink male 4pin HSD LVDS connector on the rear of the head unit. Version 12.08.2021 V5-CIC-F-PNP... -
Page 10: Connection To The Idrive
Pin the green/orange cable CAN-high (green cable CAN-low) of the vehicle harness into pin 1 of the included female 2pin AMP connector. Connect female 2pin AMP connector to 2pin AMP connector (yellow/black and blue/black cable) of harness V5C-UNI02. Version 12.08.2021 V5-CIC-F-PNP... -
Page 11: After-Market Front Camera
The pink wire of harness V5C-UNI02 can be used for +12V electric power supply (max. 1A) of the after-market front camera. Configure in the OSD- menu “MISC”, menu item “POWER OUT 2” the designated electric power supply (see chapter “Configurable switching outputs”). Version 12.08.2021 V5-CIC-F-PNP... -
Page 12: Settings For Connecting An After-Market Front Camera
(e.g. radio). After deactivation you can’t enable the parking process again until the vehicle is diving faster than 20km/h, the ignition is switched off and on or the PDC will be disabled and enabled again, if existing. Version 12.08.2021 V5-CIC-F-PNP... -
Page 13: After-Market Rear-View Camera
The green wire of harness TV-BM01 can be used for +12V electric power supply (max. 1A) of the after- market rear-view camera. Configure in the OSD- menu “MISC”, menu item “POWER OUT 2” the designated electric power supply (see chapter “Configurable switching outputs”). Version 12.08.2021 V5-CIC-F-PNP... -
Page 14: Settings For Connecting An After-Market Rear-View Camera
The interface turns off, if PDC or reverse gear is enabled and it displays factory rear-view INPUTS camera and/or PDC-display For vehicles with PDC button. Enabled while Reverse Logic Intelligent parking process and up to 20 km/h or together with PDC if existing Version 12.08.2021 V5-CIC-F-PNP... -
Page 15: Smart-Link
SMART-LINK module. Configure in the OSD-menu “MISC”, menu item “Power Out 1” the setting “CAN” (see also chapter “Configurable switching outputs”). Connect the SMART-LINK interface control port “STA-UART” (available separately) to the "SMART-LINK CarPlay® Android Auto®" socket of V5C-UNI01 harness. Version 12.08.2021 V5-CIC-F-PNP... -
Page 16: Smart-Link Audio Connection
You have to configure some settings in the OSD-menu INPUTS if you want to connect the SMART-LINK module (Operation of the OSD: see chapter “OSD-Operation”). OSD-menu Menu item Setting Explication No front camera/SMART-LINK connected INPUTS Enables the " FRONT CAM" input and control SmartPhone for the SMART-LINK set Version 12.08.2021 V5-CIC-F-PNP... -
Page 17: Configurable Trigger Outputs
+12V when the interface is on (red LED on) Ignition +12V when ignition is on +12V when the rear-view camera input is POWER OUT1 RearCam activated (pink) MISC POWER OUT2 (green) Reverse Gear +12V when reverse gear is engaged Trigger putput deactivated Version 12.08.2021 V5-CIC-F-PNP... -
Page 18: Picture Settings
= 16:9 video in the center -AV+LVDS = 16:9 video on left side, factory picture on right side - 6.5” and 7” 16:9 monitor: -FULL = 16:9 video full screen mode -ZOOM = 16:9 video full screen mode - zoom Version 12.08.2021 V5-CIC-F-PNP... -
Page 19: Operation
4. Operation 4.1. OSD – On-screen display You can change the basic configurations of the interface in the OSD (on screen display). 4.1.1. OSD – Operation You can control the OSD by iDrive. 4.1.1.1. 8-button iDrive Version 12.08.2021 V5-CIC-F-PNP... -
Page 20: 2-Button Idrive In Mini
(Operation of the OSD: see chapter “OSD-Operation”): OSD-menu Menu item Setting Explication H POSITION 0-xxx Horizontal position of the OSD V POSITION 0-xxx Vertical position of the OSD VERSION X.XX.XX Displays the current SW-version MISC FACTORY RESET Resetting to factory settings Version 12.08.2021 V5-CIC-F-PNP... -
Page 21: Video-In-Motion Function
Explication Video-in-motion activated MISC Video-in-motion deactivated For the V5-CIC-F-PNP the video-in-motion function is permanently active without disturbing the navigation performance. 4.3. Selecting the interface as current video-source In the vehicle’s CD/Multimedia > External devices menu, activate AUX front by iDrive and after it long press CD-button to choose the interface as current video-source. -
Page 22: Controlling Of The Connected Smart-Link Module
Controlling of the connected SMART-LINK module The picture shows which functions of the connected SMART-LINK module can be executed by iDrive control panel. Once the FVC/SmartPhone input is activated the iDrive control panel action will execute the function described in the picture. Version 12.08.2021 V5-CIC-F-PNP... -
Page 23: Specifications
Mini7USB 7. Technical Support Caraudio-Systems Vertriebs GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@caraudio-systems.de Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners. Version 12.08.2021 V5-CIC-F-PNP...
Need help?
Do you have a question about the V5-CIC-F-PNP and is the answer not in the manual?
Questions and answers