Table of Contents
Advertisement
Installation procedure
How to mount the product
The product is mounted by drilling a hole in a table and using the included table mount adapter to secure it to the table.
1
Decide where you want to mount the product and drill a hole in the table at that location.
A 30 mm (1.2") diameter hole is required. Also, the maximum thickness of the table is 30 mm (1.2").
φ
30 mm
2
Remove the cable fixing screws on the bottom of the microphone.
Retain and do not lose the removed cable fixing screws. You will need them if you ever decide to use the
product without attaching it to a table.
3
Attach the table mount adapter to the bottom of the microphone.
Attach the table mount adapter with the included table mount adapter mounting screws.
Attach the table mount adapter so that the cable runs alongside the table mount adapter. Do not pass the
cable through the interior of the table mount adapter.
11
Advertisement
Table of Contents
