Advertisement
Ⅳ.2.3. Device Information
Ⅴ. External Device Installation
S2 can mount motion cameras, and it currently supports GoPro HERO [3,
3+, 4, 5, 6, 7, 8] and other motion cameras with the same connector.
how to install：
1.Prepare hand tightening screws and waterproof protective cover
2. Place the movement camera in a waterproof protective cover and
sealed closed；
3. Attach the connector of waterproof cover to S2 GoPro mount, fasten
and lock them by hand screws.
Note: Please purchase the motion camera by yourself.
S2 supports motion camera lens front or rear.！
© 2020-2025 GENEINNO All Rights Reserved.
Device Model: The device model
•
Firmware : The version of the firmware
•
Serial Number: The serial number of
•
the product
Voltage: Device Voltage
•
Current: Device Current
•
Activation Date: Date the product was
•
activated
MAC: Device MAC code
•
Factory Reset: restore all settings to
•
default
10
Advertisement
