Advertisement
IV. Getting started
III.2 Start S2
Unlock the Safety Lock
III.3 Switch gears manually
How to- Keep pressing the power button (left hand) and press the motor
button (right hand) twice to shift gears manually between low and high speed.
IIII.4 Battery charge
1. Align the charging stand of the special charger with the magnetic interface of the
device, and then insert the charger into the AC mains socket (AC100-240V 50/60Hz)
2. The LED light on adaptor is red when charging, Logo light will turn off after 30
seconds breathing; The light on adaptor turns green when battery is fully charged, which
takes approximately 1.5-2 hours.
3. Please charge in a dry and ventilated environment.
Ensure the magnetic charging interface and the adapter charging
interface are dry and clean, no foreign materials attached and no
water among the charging interfaces.
© 2020-2025 GENEINNO All Rights Reserved.
Press both buttons to start；
Grab tight underwater
6
Advertisement
