Broadlink SP3, SP3S - Smart Plug Manual & Quick Setup

Overview

Name: Smart Plug
Model: SP3S
Ratings: 230V~, 50/60Hz, 16A
Size: 50 x 81,6 x 94mm

Indications

• Reset for Smart Setup
  When the device is in any conditions, press and hold the power (reset) button for 5s until the LED indicator flashes quickly.

STEP 1 What's required

1. Internet
2. Wi-Fi Router
3. Phone
4. Power on device

• A smartphone or tablet running iOS 9.0 / Android ^TM 4.1 or higher.
• A 2.4GHz Wi-Fi network with Internet connection.
• Power on the device and make sure the LED indicator is flashing quickly.

STEP 2 Get the APP

• Connect your smartphone to your home Wi Fi network (2.4GHz only)
• Download the latest "BroadLink" APP from APP Stare, Google Play and install it on your smartphone.

STEP 3 Sign in APP

• Open the BroadLink APP tap "BroadLink account" and sign in to your cloud account.
• If you don't have an account, tap the "Sign up"" to create a new account.
• Link your account with Apple ID or Google account for quick sign-in next time (optional).

STEP 4 Add device in APP

• Tap "+" on top right corner and choose "Add device".
• The APP will start AP mode, tap "Cancel" to skip it.
• Tap "Next" to start Smart Config setup.

STEP 5 Connect device to Wi-Fi network

• Choose your home Wi-Fi network, input password and tap "Connect to Wi-Fi", the LED indicator will be flashing slower and then off. The device is successfully connected.
• Choose the room and name the device.
• Control device at BroadlLink APP now.

STEP 6 Download Alexa, Google home

• Download the latest version of Alexa or Google Home APP.
• In Alexa APP tap "" and choose "Skills & Games" Tap " " to search and enable "BroadLink",
• In Google Home APP tap "+" and choose "Set up device" Tap "works with Google", then search and enable "BroadLink".

STEP 7 Link account

• Tap "BroadLink account" and signin.
• Link your email with Apple ID or Google account for quick sign-in later (optional)
• Complete the skill account linking.

STEP 8 Discover devices

• After discovering devices, you will be able to control the device by APP or voice. Congratulations

* If you are setting up the second device, you will get notification from Alexa after STEP 4 is completed, or you can find the device in Google Home APP after few minutes.

Note

• This product supports only Wi-Fi 802.1 1 b/g/n (2.4G).
• Please follow the instruction to set up your device. In case of any issue, please contact the authorized dealers or BroadLink customer service.
• Specifications may be altered without prior notice.
• Please subject to the actual product performance.

• Do not connect after each other.
• Only indoor use.
• To disconnect Voltage pull the plug.

* Google Assistant is not available in certain languages and countries.

Documents / Resources

References

• App Store - Apple
• Google Play

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Broadlink SP3, SP3S - Smart Plug Manual & Quick Setup