6
Power
WARNING
•
DISCONNECTING THE DEVICE
FROM THE MAIN POWER
- The Power plug is the
disconnecting device. In case of
an emergency, the Power Plug
must remain readily accessible.
•
The grounding wire should be
connected. (Except for devices
which are not grounded.)
- Ensure that you connect the
grounding cable to avoid electric
shock. If it is not possible to
ground the unit, have a qualified
electrician install a separate
circuit breaker.
Do not try to ground the
projector by connecting it to
telephone wires, lightning rods
or gas pipes.
•
The power plug should be inserted
fully into the power outlet.
- An unstable connection may
cause a fire.
•
Do not place heavy objects on the
power cord.
- This may result in fire or electric
shock.
•
Never touch the power plug with
wet hands.
- This may result in electric shock.
•
Do not plug too many devices into
one multi-power outlet.
- This may result in fire due to the
power outlet overheating.
•
Keep the power plug, and the used
power outlet clean from dust or
foreign materials building up.
- This may result in fire.
•
If there is any smoke or a burning
smell from the projector or power
cord, stop using the product
immediately. Disconnect the power
cord from the power outlet, and
then contact the customer service
center.
- This may result in fire.
•
To turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.
•
When removing the power plug,
make sure your fingers do not
contact the pin.
- This may result in fire or electric
shock.