Page 1
Dishwasher / User Manual SJ12600E - SJ12600EX...
Page 2
Thank you for choosing this product. This user manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this user manual before using your appliance and keep this book for future reference.
1 SAFETY INSTRUCTIONS 1.1 General Safety Warnings • Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.
There may be some residue left in the machine after washing. Keep children away from the machine when it is open. 1.2 Installation Warnings • Choose a suitable and safe place to install your machine. • Only original spare parts should be used with the machine.
Always use the coated plug supplied with your machine. If the electrical cable is damaged, it should only be replaced by a qualified electrician. • Connect the hose directly to the water inlet tap. The pressure supplied by the tap should be a minimum of 0.03 MPa and a maximum of 1 MPa.
Page 7
Do not open the door while the machine is in operation, hot water may spill out. Safety devices ensure the machine stops if the door is opened. The machine door should not be left open. It may cause accidents. Place knives and other sharp objects in the cutlery basket in a blade-down position.
2 INSTALLATION 2.2 Water Connection We recommend fitting a filter to your water 2.1 Machine Positioning inlet supply in order to prevent damage to your machine due to contamination (sand, When positioning the machine, place it in rust, etc.) from indoor plumbing. This will an area where dishes can be easily loaded also help prevent yellowing and deposit and unloaded.
2.5 Electrical Connection WARNING: After the connections are made, turn the tap on fully and check WARNING: Your machine is set to for water leaks. Always turn off the water operate at 220-240 V. If the mains inlet tap after a wash program has finished. voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection.
2.6 Fitting The Machine Undercounter If you wish to fit your machine undercounter, there must be sufficient space to do so and the wiring-plumbing must be suitable to do so (1). If the space under the countertop is suitable for fitting your machine, remove the worktop as shown in the illustration (2).
3 TECHNICAL SPECIFICATIONS 3.2 Technical Specifications 12 place Capacity settings Dimensions Height 850(mm) Width 598(mm) Depth 598(mm) Net weight 40,9 kg Operating 220-240V voltage / 50 Hz frequency Total current 10(A) Total power 1900(W) Maximum: Water supply 1 (Mpa) pressure Minimum: 0.03 (Mpa) 3.1 General Appearance...
Page 12
RECYCLING • Some machine components and packaging consist of recyclable materials. • Plastics are marked with the international abbreviations:(>PE<, >PP<, etc. ) • The cardboard parts consist of recycled paper. They can be put into waste paper containers for recycling. •...
4 BEFORE USING THE 4.3 Fill The Salt (IF AVAILABLE) APPLIANCE To add softener salt, open the salt compartment cap by turning it counter 4.1 Preparing Your Dishwasher For First clockwise. (1) (2) At first use, fill the compartment with 1 kg salt and water (3) until it is almost overflowing.
4.4 Test Strip Run water Keep the Shake the Wait Set the hardness level of through the strip in the strip. (1min.) your machine. tap (1min.) water (1sec) second munite munite NOTE: The level is set to 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices.
amount of detergent needed depends on combined detergents, please contact the the cycle, load size, and soil level of dishes. detergent manufacturer. Do not fill detergent into the detergent When you stop using combined detergents, compartment more than required; otherwise make sure that water hardness and rinse you can see whitish streaks or bluish layers aid settings are set to the correct level.
Page 16
Level Brightener Dose Indicator Rinse-aid not Wash LED is on. dispensed 1 dose is End LED is on. dispensed 2 doses are Start/Pause LED dispensed is on. 3 doses are Wash and End dispensed LEDs are on. 4 doses are Wash and Start/ dispensed Pause LEDs are on.
5 LOADING YOUR DISHWASHER Height Adjustable Rack The height adjustable racks enable For best results, follow these loading glasses and cups to be placed on or under guidelines. the racks. The racks can be adjusted to 2 Loading the household dishwasher up to the different heights.
Page 18
Lower Basket Top basket Two Folding Racks Fixed Rack The folding racks on the lower basket allow Upper basket racks have two positions: for the placement of larger items, such as open (a) and closed (b). You can place pots and pans. Each section can be folded cups on the racks to be washed.
5.2 Alternative Basket Loads Unsuitable Items For Dishwashing Lower Basket • Cigarette ashes, candle leftovers, polish, paint, chemical substances, iron-alloy materials. • Forks, spoons and knives with wooden, bone, ivory or nacrecoated handles; glued items, items soiled with abrasive, acidic or base chemicals. •...
6 PROGRAMME TABLE Program Quick 30’ 40°C Super 50’ Intensive 65°C Hygiene 70°C Name: Standard program for Suitable for Suitable for normally soiled Suitable for Suitable for heavily soiled lightly soiled daily using normally soiled Type of Soil: heavily soiled dishes requiring dishes and quick dishes with...
7 THE CONTROL PANEL there will be no delay. Press the Start/ Pause button to activate the delay. The programme can be selected first and the delay time after, or vice versa. To cancel or change the delay time, press the Start/ Pause button first, then select a new delay time.
7.3 Switching The Machine Off Press the Start/Pause button to start the newly selected programme. Disconnect the plug and The new programme will turn off the water tap. resume the course of the old programme. When the End light illuminates, turn the Programme Selection knob to the 'Off' position to switch your machine off.
8 CLEANING AND 8.1 Filters MAINTENANCE Clean the filters and spray arms at least once a week. If any food waste remains Cleaning your dishwasher is important to maintain the machine’s service life or foreign objects on the coarse and Make sure that the water softening setting fine filters, remove them and clean them (If available) is done correctly and correct...
8.2 Spray Arms 8.3 Drain Pump Make sure that the spray holes are not Large food residues or foreign objects which clogged and that no food waste or foreign were not captured by the filters may block object is stuck to the spray arms. If there is the waste water pump.
9 TROUBLESHOOTING FAULT POSSIBLE CAUSE TROUBLESHOOTING Your Dishwasher is not plugged in. Plug your Dishwasher in. Switch your Dishwasher on by pressing the Your Dishwasher is not switched on. On/Off button. Fuse blown. Check your indoor fuses. The programme does not start.
Page 26
FAULT POSSIBLE CAUSE TROUBLESHOOTING Use the correct amount of detergent, as Not enough detergent used. instructed in the programme table. Rinse aid dosage and/or water Increase rinse aid and/or water softener softener setting set too low. level. Whitish stains remains on dishes.
Page 27
AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE CODE POSSIBLE FAULT WHAT TO DO Start/ Wash Pause Make sure the water inlet tap is open and water is flowing. Insufficient water Separate the inlet hose from the tap and clean the filter of the hose. Contact for service if the error continues.
Page 28
Imported by SVAN TRADING S.L. Av. Altos Hornos S/N. Pto. Sagunto (46520). Valencia, España. info@svanelectro.com 52463274 R45 960600034...
Need help?
Do you have a question about the SJ12600E and is the answer not in the manual?
Questions and answers