Change Of Brush; Storage; Specifications; Warranty Terms And Conditions - Texas A/S WRS 650 User Manual

Table of Contents

Advertisement

Available languages

Available languages

more effective, but it can make scratches/marks on the
pavers, so be careful.
These brushes cannot be used to remove bigger grass
turfs or big weed plants.
Activate brush by pressing on On/Off switch with
fingers. Release to stop.
The rotation speed of the brush can be adjusted by
turning the switch on the side of the handle (Fig. 1-7).
Do not press the brush down onto the surface. This will
increase the pressure on the brush and decrease its
working life. Extension cords longer than 50 feet must
not be coiled, but must be rolled out, laying loosely on
the ground.

Change of brush

Figure 7
1.
Hold the release button (A) down while loosening
the wing nut (B).
2.
Mount another brush ring.
Always disconnect power before changing brush!
Remember!
You can acquire more brushes on www.texas.dk
Nylon brush:
Steel brush:
Surface brush L/R part:

Storage

Clean the machine after use. Make sure no debris gets
in through the cooling slots of the motor housing. Store
the cleaner in a frost-free area, out of reach of children.

Specifications

Voltage
Effect
No load speed
Brush diameter
Working width
LpA
LwA
Weight
Vibration
Art. no. 90063100
Art. no. 90063090
Art. no. 447826
WRS 650
230-240V ~ 50 Hz
650W
1100-1800 rpm
100 mm
190 mm
85 dB(A)
95 dB(A)
3.1 / 3.4 kg
2
2.3 m/s

Warranty terms and conditions

The warranty period is 2 years for private end users in
EU countries.
Products sold for commercial use, only have a warranty
period of 1 year.
The warranty covers material and/or fabrication faults.
Normal wear and replacement of wearing parts are
NOT covered by the warranty.
Wearing parts, which are NOT covered for more than
12 months:
All kinds of brushes
Wheels
Fuses
Switches
Printed circuit boards (PCB)
Covers
The warranty does NOT cover damages/faults caused
by:
Lack of service and maintenance
Structural changes
Exposure to unusual external conditions
Damages to the bodywork, protection guards,
panels etc.
If the machine has been improperly used or
overloaded
Use of unoriginal spare parts.
Other conditions where Texas cannot be held
responsible.
* We reserve the right to change the conditions and
accept no liability for any misprints
9

Advertisement

Table of Contents
loading

Table of Contents