Restriction Of Attachment Installation - Hitachi EX2600-7B Workshop Manual

 Make sure the worksite has sufficient strength to firmly
support the machine.
When working close to an excavation or at road
shoulders, operate the machine with the tracks positioned
perpendicular to the cliff face with travel motors at the rear,
so that the machine can more easily evacuate if the cliff face
collapses.
 If working on the bottom of a cliff or a high bank is required,
be sure to investigate the area first and confirm that no
danger of the cliff or bank collapsing exists. If any possibility
of cliff or bank collapsing exists, do not work on the area.
 Soft ground may collapse when the machine is operated on
it, possibly causing the machine to tip over. When working
on soft ground is required, be sure to reinforce the ground
first using steel plates strong and firm enough to easily
support the machine.
 Note that there is always a possibility of machine tipping
over when working on rough terrain or on slopes. Prevent
machine tipping over from occurring. When operating on
rough terrain or on slopes:
 Reduce the engine speed.
 Select slow travel speed mode.
 Operate the machine slowly and be cautious with
machine movements.

Restriction of Attachment Installation

Do not install an attachment which exceeds the specified
weight for the machine structure.
SAFETY
SA-12
M104-05-016