Single Fingering; Standard Fingering; Using The Metronome; Using Beat - Sound-X SMI-1410 User Manual

Single Fingering

[1] Repeatedly press
side of the display.
[2] Press STYLE
[3] Enter a two-digit auto-style number.
[4] To begin the auto-style before the auto accompaniment, press
to synchronize the start of the selected auto-rhythm with your accompaniment, press
SYNC/FILL-IN .
[5] Begin the accompaniment at the desired interval by pressing the desired
accompaniment key(s).
[6] To play a melody along with the accompaniment, press any key(s) to the right.
[7] Adjust the TEMPO
[8] To change chords without interrupting the style, simply press the auto
accompaniment key(s) required to form the new chord. The name of the chord appears
on the display. To stop auto accompaniment but not the auto-style, repeatedly press
CHORD until the black dot appears next to
accompaniment and the auto-style, press

Standard Fingering

The standard fingering method uses standard formations of three or more notes, and
lets the experienced musician play a wider variety of accompaniment chords.
Follow these steps to start standard fingering auto accompaniment.
[1] Repeatedly press CHORD until a black dot appears next to FINGERED on the left
side of the display.
[2] Follow steps 2 - 8 or Single Fingering.

Using the Metronome

To turn on the keyboard's metronome, press voice or style, then press
metronome's bar swings along with the tempo you selected, and the corresponding
beat appears. Press

Using Beat

When the metronome is on, repeatedly press BEAT until you hear the desired beat to
adjust it. 9 beats (00.02-09) are available and can be selected at regular intervals. The
beat number you selected appears.
CHORD until a black dot appears next to S. FINGER on the left
.
and VOLUME
METRO again to turn the metronome off.
to the desired level.
NORMAL on the display. Or, to stop auto
START/STOP .
E09
START/STOP . Or,
METRO . The