Sound-X SMI-1410 User Manual page 12

Using Percussion Pad
Your keyboard's percussion pads follow sounds of 5 different percussion instruments,
(bass drum, snare drum, hi-hat open, high tom-tom, and hi-hat close) to play at your
finger tips.
To play a percussion pad sound, simply press the desired pad at any time. The keyboard
plays the selected percussion sound each time you press the pad.
Assigning a Percussion Pad Sound
You can assign any of the available percussion sounds onto any of the percussion pads.
This allows you to quickly select and play any percussion sound that the keyboard can
make.
Note:
The keyboard clears any and sound you assign to a percussion pad each time you turn if off.
Follow these steps to record and play a percussion pad sound.
[1] Press VOICE
[2] Select the voice you want by pressing any of the 16 white keys in the middle of the
keyboard until you hear the sound you want.
[3] When you hear the voice you want to record, hold down the percussion pad you
want to assign the sound to and press the white key.
[4] Play the percussion pad to hear the assigned voice.
Transposing
The keyboard automatically selects the key of middle C each time you turn it on. For
added flexibility, you can transpose (change) The keyboard's key using as many as 12
steps (+6/-6). You can adjust the transposition freely by pressing the
buttons.
To transpose the keyboard's key, press
X'POSER - to decrease a chromatic.
To reset the keyboard's key to its default, press
same time.
then enter " " and " " on the keyboard. 5 0
X'POSER + to raise a chromatic scale. Or
X'POSER +
E12
X'POSER
and X'POSER - at the