Table of Contents
Advertisement
Use Handholds and Steps
Falling is one of the major causes of personal injury.
When you get on and off the machine, always face the
machine and maintain a three-point contact with the
steps and handrails.
Do not use any controls as hand-holds.
Never jump on or off the machine. Never mount or
dismount a moving machine.
Be careful of slippery conditions on platforms, steps, and
handrails when leaving the machine.
Never get on and off the machine with tools in your
hands.
Adjust the Operator's Seat
A poorly adjusted seat for either the operator or for the
work at hand may quickly fatigue the operator leading to
misoperations.
The seat should be adjusted whenever changing the
operator for the machine.
The operator should be able to fully depress the pedals
and to correctly operate the control levers with his back
against the seat back.
If not, move the seat forward or backward, and check
again.
Adjust the rear view mirror position so that the best rear
visibility is obtained from the operator's seat. If the mirror
is broken, immediately replace it with a new one.
SAFETY
SA-6
SA-439
SA-378
Advertisement
Table of Contents
