Related Manuals for MSD Allflex APR250
Summary of Contents for MSD Allflex APR250
- Page 1 APR250 Reader Quick Start Up Guide The Allflex APR250 Reader is made to read livestock electronic identification Tags (EID) that offer simple-to-use essential reading and management capabilities and delivers outstanding value even for small farms.
-
Page 2: Getting Started
Getting Started Battery Charge The device should be fully charged before the first use. To charge, use the provided Magnetic-USB power source. Connecting the USB cable: The magnetized connectors “find” the proper orientation almost automatically by attracting each other in the appropriate order. -
Page 3: Device Properties
Device Properties Multi-Color Status Led Blue Status Led The color changes according Used to indicate the connection to the charging status when status when the display is the display is switched off switched off Flashing every 3 seconds – Flashing – Charging SD Card Mode Solid- Fully Charged Flashing once a second –... - Page 4 Display Battery Status Indicator USB connection Shows the approximate Indicates when the battery level. It also reader is connected displays battery faults, via USB such as high temperature. Clock Clock time in 24-hour mode `:18:57 Press to read no active group Menu New Group Left Soft-Key...
- Page 5 Quick Reading Steps up to 25 cm Reading EID Tags: 1.Press ENTER to Read 2.Scan the EID tag near the field lines of the reader 3.The device’s RGB LED signal will turn on, as well as the signalization motors (sound and vibration) `:18:57 `:18:57 980 0001010178...
-
Page 6: What Is In The Box
What is in the Box USB-A APR250 Reader device Magnetic-Connector Cable For more information visit www.allflex.global/allflex-apr-250 Copyright© 2023 Merck & Co., Inc., Rahway, NJ, USA and its affiliates. All rights reserved.
Need help?
Do you have a question about the Allflex APR250 and is the answer not in the manual?
Questions and answers